Kienzle Automotive CR1225DAB Plus, Инструкция по эксплуатации

Страница: 15 / 47

14
RDS Basics
AF (Alternative Frequency):
When the radio signal strength is poor, enabling the AF function will
allow the unit to automatically search another station with the same PI (Program Identification) as the
current station but with stronger signal strength.
PS (Program Service name):
The name of station will be display instead of frequency.
AF Mode:
Long press the
[DISP]
to enter menu mode, then Press
[  ]
or
[  ]
button to show AF mode,
then rotate the
[volume knob]
to select AF ON or OFF.
Note:
RDS service availability varies with areas. Please understand if RDS service is not available in your
area.
AF indicator on LCD will flash until RDS information is received. If RDS service is not available in your
area, turn off the AF mode.
When the AF function is turned on, this could cause interruptions in the radio signal.
REG Mode:
Long press the
[DISP]
to enter menu mode, then Press the
[  ]
or
[  ]
button to show AF
mode, rotate the
[volume knob]
to select REG mode on and off.
REG on: AF function will implement the regional code (of the PI) and only stations in the current region
can be tuned automatically.
REG off: AF function will ignore the regional code (of the PI) and stations in the other regions can also
be tuned automatically.
CT Service (Clock Time)
When receiving an RDS station, the CT (Clock Time) service automatically adjusts the time.
Traffic Announcements
Some RDS FM stations periodically provide traffic information. TP (Traffic Program Identification)
Broadcasting of traffic information
Broadcasting of traffic information.
TA (Traffic Announcements Identification) Radio announcements on traffic conditions.
TA Mode:
Long press the
[DISP]
to enter menu mode, then Press the
[UP

or
[

]
button to show TA
mode, rotate the
[volume knob]
to select TA ON or OFF. When TA mode is turned on, the TA
indicator will illume. When traffic announcement is received, the TA indicator will display. The unit will
temporarily switch to the tuner mode (regardless of the current mode) and begin broadcasting the
announcement at TA volume level After the traffic announcement is over, it will return to the previous
mode and volume level. When TA is turned on, SEEK, SCAN, AMS function can only be received or
saved when traffic program identification (TP) code is received.
TA Retune:
Long press the
[DISP]
to enter menu mode, then Press
[

]
or
[

]
button to show TA
Retune mode, rotate the
[volume knob]
to select Retune L (Long time) or S (Short time).
TA Volume:
To change the TA volume level, you have to adjust the volume during an announcement.