A
Page 11 / 12
Datasheet 1.10-60.001-01-EN
RBW201-C, RBW202-C, RBW204-C, RBW205-C
Product Description
Issue 2017-07-20
CAN Address Setting
The address switch (1) is located on the PCB of the room control module (rear of device).
Address setting:
■
For RCN150-L, RCN151-L, RCN152-L, RCN155-L, RCC200-L or RCN200-L with basic appli-
cation: Address 1 for main room,
Address 2 for secondary room
■
For RCN150-L, RCN151-L, RCN152-L, RCN155-L, RCC200-L, RCN200-L or RCN420-B
configured with PS4000: Address 1 to 4 for room 1 to 4
■
DDC4000: Address 1 to 9
■
DDC420: Address 1 to 9
1
Address switch
Installation
■
Online installation with the RCxxxx-L technolon® room controller:
The RCxxxx-L technolon® room controller can also be identified directly on the room control
module using a magnet (3). To do so, guide a magnet (3) along the right side of the RBW2xx-C
room control module.
This triggers the service PIN in the RCxxxx-L room controller internally. This is indicated by a
service LED (4) on the top part of the housing on the room control modules that lights up green.
1
3
4
