background image

567013-02-030419

Dear  Parents, Teachers, 

and Other Supervising 

Adults,

This kit offers additional parts for 

models and coding challenges for 

the Kids First Coding & Robotics 

Kit, which is required to build all 

the models and perform the coding 

activities. 

Together with the base kit, this kit is 

designed to teach children the basic 

principles of programming in a fun, 

interactive, and experimental way. 

This kit picks up where the base kit 

leaves off, offering more challenging 

builds with more technical features. 

The coding lessons are presented 

as challenges that the child must 

attempt to solve before the answers 

are given.

We recommend you use this kit after 

your child has mastered the lessons 

in the base kit, or for children who are 

ready for a more difficult challenge.

With your help, children will build 

robots and program them to 

complete a specific challenge. 

Children will likely need help from 

a parent or adult while using this 

product. They may need your help 

interpreting terms that are new to 

them. They may need your help 

assembling difficult models or 

programs. And they may need your 

help explaining what the robot is 

doing and why.

Safety Info   .  .  .  .  .  .  .  . Inside front cover
Introduction  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  1
Kit Contents   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  2
Challenges
 

Forklift   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  3

 Claw  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  5
 Catapult   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  8
 Walker   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 11
 Bulldozer    .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .13
  Scissor Lift   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .15
 Hammer  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  . 17
 Plow   .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .  .19

Possible Solutions to the  

 Challenges   .  .  .  .  .  Inside back cover

1

Coding & Robotics: Challenge Pack 1

INTRODUCTION

TABLE OF CONTENTS

Содержание Coding & Robotics

























Отзывы: