26
Step 10: Swing Wall Assembly
Part 2
C:
Place (1935) Side Roof on both (1931) Posts as shown in fig. 10.3.
D:
Place (1938) Wall Mount across (1895) Floor End and (1935) Side Roof, make sure to use the hole in the
Side Roof that measures 16-1/4” from the hole on the shorter overhang edge as shown in fig. 10.4. Attach using
2 (G4) 5/16 x 4” Hex Bolts (with lock washer, flat washer and t-nut) as shown in fig. 10.4.
E:
Attach (1935) Side Roof to both (1931) Posts using 2 (H2) 1/4 x 2” Hex Bolts (with lock washer, flat washer
and t-nut). (fig. 10.4)
F:
Tighten all (H2) bolts from this step, keeping (G4) bolts loose.
Wood Parts
Hardware
Notice
overhang at
the top
Fig. 10.4
1895
Fig. 10.3
G4
H2
1931
1935
1938
1931
1/4” Flat
Washer
1/4” Lock
Washer
1-4”
T-Nut
2 x
1/4 x 2” Hex Bolt (1/4” lock washer, 1/4” flat washer, 1/4” t-nut)
2 x
5/16 x 4” Hex Bolt (5/16” lock washer, 5/16” flat washer, 5/16” t-nut)
1 x
Side Roof 1 x 4 x 55-1/8”
1 x
Wall Mount 2 x 4 x 37-1/2”
1935
1938
G4
H2
5/16”Flat
Washer
5/16”” Lock
Washer
5/16”
T-Nut
Notice longer extension on this side
16-1/4”
H2
G4
Содержание F29010
Страница 61: ...61 NOTES NOTES...
Страница 62: ...62 NOTES NOTES...
Страница 63: ...63 NOTES NOTES...