
34
maintain a gap of 28.3cm (11-5/32") between bench rails
Flush
maintain a gap of 28.3cm (11-5/32") between bench rails
Flush
maintain a gap of 28.3cm (11-5/32") between bench rails
Flush
2 x
Chair Bottom 1” x 2” x 45 15/16”
Wood Parts
111
Hardware
Other Parts
8 x
#8 x 7/8” Truss Screw
4 x Narrow Angle Bracket
S0
111
111
111
101
111
S0
S0
Narrow
Angle
Bracket
Flush
Flush
Narrow
Angle
Bracket
Step 11: Attach Bench Assembly
Part 1
S0
102
111
x 2 per
bracket
x 2
x 2
11-5/32”
(283mm)
Fig. 11.1
Fig. 11.2
Fig. 11.3
A:
Place 2 (111) Chair Bottoms across the assembly so they are resting on the (102) Chair Support and the
(101) Counter Post Bottom. (fig. 11.1, 11.2, 11.3)
B:
Make sure that the (111) Chair Bottoms are flush to the ends of (102) Chair Support as shown in figure 11.2
and that there is a measurement of 11-5/32” between the (111) Chair Bottoms on the opposite end as shown in
figure 11.3.
C:
Attach (111) Chair Bottoms to the (102) Chair Support and (101) Counter Post Bottom using 4 Narrow Angle
Brackets with 2 (S0) #8 x 7/8” Truss Screw per bracket. (fig. 11.1, 11.2, 11.3)
Содержание Cedar Summit Timber Trail Playhouse
Страница 71: ...71 NOTES...