KidKraft BROCKWELL, Инструкция по установке и эксплуатации

Страница: 48 / 102

48
1 x SW Block Angle 2-1/2 x 3 x 15”
1 x Block SW 2-1/2 x 3 x 15”
2 x SW Post 4 x 4 x 92”
Step 15: Swing Post Assembly
Part 1
152
151
150
Note: Keep all bolts from Step 15 series loose
until start of Step 17
A:
Place (150) SW Block Angle on top of (151)
Block SW and attach 2 Heavy L-Brackets on top of
(150) SW Block Angle feeding 2 (G17) 3/8 x 6” Hex
Bolts (with 2 flat washers, plastic formed washer and
lock nut) through both boards as shown in fig. 15.1
and 15.2.
B:
Attach 3 (WB7) 5/16 x 3” Wafer Bolts (with flat
washer and t-nut) to all three holes in each (152)
SW Post as shown in fig. 15.3.
IMPORTANT!
MAKE SURE ALL 6 BOLTS ARE ATTACHED TO
MINIMIZE CHECKING OF WOOD.
C: Place (150) SW Block Angle and (151) Block
SW assembly in between 2 (152) SW Post (Heavy
L-Brackets towards the outside). Place 1 Heavy
C-Bracket on the top (152) SW Post and attach with
(G26) 3/8 x 9-1/4” Hex Bolt (with 2 flat washers and
1 lock nut), as shown in fig. 15.4.
2 x 3/8 x 6” Hex Bolt
(3/8” flat washer x 2, plastic formed washer & 3/8” lock nut)
1 x 3/8 x 9-1/4” Hex Bolt
(3/8” flat washer x 2 & 3/8” lock nut)
6 x 5/16 x 3” Wafer Bolt
(5/16” flat washer & 5/16” t-nut)
WB7
G17
Hardware
Wood Parts
G26
Other Parts
2 x Heavy L-Bracket
1 x Heavy C-Bracket
Fig. 15.4
Fig. 15.1
3/8” Flat
Washer
3/8” Lock
Nut
Fig. 15.2
Fig. 15.3
Heavy
L-Bracket
3/8” Flat
Washer
5/16” T-Nut
Plastic
Formed
Washer
3/8” Flat
Washer
3/8”
Lock
Nut
Heavy L-Bracket
Bottom View
Top View
5/16” Flat
Washer
152
Heavy C-Bracket
151
x 6
G26
3/8” Flat
Washer
152
Notice Angle
Orientation
150
151
151
150
WB7
G17