background image

INSTALLATION AND OPERATING INSTRUCTIONS

To reduce the risk of serious injury or death, you must read and follow 

these instructions. Keep and refer to these instructions often and give 

them to any future owner of this play system. Manufacturer contact information provided below.
OBSTACLE FREE SAFETY ZONE - 22’-3” x 28’ x 13’-10” area requires Protective Surfacing. See page 3. 
MAXIMUM VERTICAL FALL HEIGHT - 6’(1.8m) 
CAPACITY - 6 Users Maximum, Ages 3 to 7; Weight Limit 110 lbs. (49.9 kg) per child.
RESIDENTIAL HOME USE ONLY. Not intended for public areas such as schools, churches, nurseries, day cares or parks.

Warning. Only for domestic use.

WARNING

9404415EDB

Rev 

01/14/2022

Table of Contents

Warnings and Safe Play Instructions   . . . . . . . . . . . . . . pg. 2

Protective Surfacing Guidelines   . . . . . . . . . . . . . . . . . . pg. 3

Instructions for Proper Maintenance  . . . . . . . . . . . . . . . pg. 4

About Our Wood - Limited Warranty   . . . . . . . . . . . . pg. 5-6

Keys to Assembly Success  . . . . . . . . . . . . . . . . . . . . . . pg. 7

Part ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 9

Step-By-Step Instructions  . . . . . . . . . . . . . . . . . . . . . . pg. 14

Installation of I.D./Warning Plaque   . . . . . . . . . . . . . . . pg.56

AINSLEY 
OUTDOOR 
CLIMBING 
FRAME-FSC 
F26415EDB

KidKraft, Inc.

4630 Olin Road

Dallas, Texas 75244 USA

[email protected]

[email protected]

1.800.933.0771

972.385.0100

For online parts replacement visit

https://parts.kidkraft.com/

KidKraft Netherlands BV

Olympisch Stadion 8 

1076 DE Amsterdam

The Netherlands

[email protected]

+31 20 305 8620 M-F from 09:00 to 17:30

(GMT+1)

For online parts replacement visit

https://parts.kidkraft.eu/

INSTALLATION AND OPERATING INSTRUCTIONS

To reduce the risk of serious injury or death, you must read and 

follow these instructions. Keep and refer to these instructions often 

and give them to any future owner of this play system. Manufacturer contact information provided below.
OBSTACLE FREE SAFETY ZONE - 22’3” x 28’ area requires Protective Surfacing. See page 3. 
MAXIMUM VERTICAL FALL HEIGHT - 6’ (1.8 m) 
CAPACITY - Users Maximum, Ages 3 to 10; Weight Limit 110 lbs. (49.9 kg) per child.
RESIDENTIAL HOME USE ONLY. Not intended for public areas such as schools, churches, nurseries, day cares or parks.

WARNING 

9404145

Rev 0

7

/0

3

/20

20

Table of Contents

Warnings and Safe Play Instructions. . . . . . . . . . . . . . . pg. 2
Protective Surfacing Guidelines. . . . . . . . . . . . . . . . . . . pg. 3
Instructions for Proper Maintenance . . . . . . . . . . . . . . . pg. 4
About Our Wood – Limited Warranty  . . . . . . . . . . . . . . pg. 5
Keys to Assembly Success . . . . . . . . . . . . . . . . . . . . . . pg. 6
Part ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pg. 7
Installation of I.D./Warning Plaque  . . . . . . . . . . . .Final Step

4 - 8 Hrs

Two person

assembly

KidKraft Netherlands BV

Olympisch Stadion 

8

1076

 

DE Amsterdam

The Netherlands 

[email protected]

+31 20 305 8620 M-F from 09:00 to 17:30

 

(GMT+1)

For online parts replacement visit 

https://parts.kidkraft.eu/

KidKraft, Inc.

4630 Olin Road

Dallas, Texas 75244 USA 

[email protected] 

[email protected] 

1.800.933.0771

972.385.0100

For online parts replacement visit 

https://parts.kidkraft.com/

A INSLEY
PLAY
SYSTEM
F24145

Warning. Only for domestic use.

4 - 8 Hrs

Two person

assembly

 22' 3" 

 28' 

 7' 10" 

 9' 

 10' 3" 

Содержание BILT F26415EDB



























































Отзывы: