KIDDY MAXIFIX PRO -, Руководство пользователя

Страница: 27 / 112

Place your baby in the baby car seat and then position the shoulder belts (D)
over its shoulders (Fig. 11).
Place the safety belt lock tongues (C) attached to the shoulder belts over
each other (Fig. 12).
Now push the safety belt lock tongues (C) into the belt clip (B). It is locked in
place when a click sound is heard (Fig. 13).
Make certain that it is securely locked in place!
Now pull the centre belt (M) until the belt system fits the body of the child
snugly (Fig. 14)!
Make sure that the belt system is not twisted and does not fit the
child’s body too tightly.
Slacken the shoulder belts (D) as described in Point 4.3.1 and press the red
button on the belt clip (B) to unbuckle the baby. Now you can take the child
out of the seat.
6. Installation in the vehicle
6.1 Installation with the vehicle restraint
6.1.1 Seat selection
Read up all the necessary information about the use of child
restraint systems in your vehicle owner’s manual.
The kiddy maxifix pro child restraint system can be installed on any seat of
vehicles equipped with a 3-point belt system (Fig. 15).
8
ENG