manualshive.com logo in svg

Kidde 21027323, Руководство пользователя, Страница: 26 / 34

Поделиться
Скачать
Kidde 21027323 Скачать руководство пользователя страница 26

26

locate

In an interconnected system (all units will be alarming together), a unit that detects smoke or CO and initiates an alarm 

is called the “initiating alarm unit.” Initiating alarm units will be flashing the Green LED every second during alarm. De-

pending on unit locations, and the location of the source of smoke or CO, it is possible to have more than one initiating 

unit. If you suspect a nuisance alarm situation, you can use this feature to help you locate the initiating alarm unit(s) in a 

wireless alarm interconnect system. Push the button on any non-initiating wireless unit, and ALL wireless units EXCEPT 

the initiating alarm unit(s) will silence for two minutes. You can use the LOCATE feature repeatedly until you find the 

initiating alarm unit(s), or the air has been cleared of the condition causing the alarm.

note: 

Hush® and Locate features are dependent on the type of models in your interconnect system. Non-wireless 

models cannot receive the wireless Locate feature and will continue to alarm until the initiating unit is Hushed or 

the Smoke/ CO condition clears.

 WArnIng:  AltHoUgH reSet And loCAte FeAtUre CAn be USed For Co AlArM eVentS, It IS 

IMpoSSIble to deterMIne tHe SoUrCe oF A Co AlArM USIng SIgHt or SMell. AlWAyS ConSIder 

A Co AlArM eVent AS dAngeroUS.

13. Battery Backup

This alarm is powered with AC power, but also contains a sealed lithium battery backup system. No battery installation or 

replacement is necessary for the life of the alarm. 

note:

 

AC power must be connected to obtain the full 10 year battery and unit life.

 

Constant exposure to high 

or low humidity or temperatures may reduce battery life.

 WArnIng:  no SerVICeAble pArtS InClUded. do not AtteMpt to open tHe AlArM For Any 

reASon! do not try to repAIr tHe AlArM yoUrSelF.

Содержание 21027323



































Отзывы:

Нет отзывов