3
Model
External Fuse
Power/Ground Wire
ZXM450.2
1 x 60 Ampere
4 Gauge
at the RCA output, which effectively passes the audio signal to another amplifi er or component. Keep the audio
signal cable away from factory wiring harnesses and other power wiring. If you need to cross this wiring, cross it
at a 90 degree angle.
source unit
high-level speaker
outputs
to amplifi er
shield
+
–
core conductor
GND REM +12V
12V
battery
external fuse
remote turn-on
(see page 5)
18”
(45cm)
SPKR +
SPKR -
SPKR +
SPKR -
L+ L–
R+ R–
L
L
R
R
signal in
signal out
STEREO OPERATION
minimum impedance of 2 ohms per channel
Install a fuse within 18” (45cm) of the battery and in-line with the power cable connected to your amplifi er. If you
ever need to remove the amplifi er from the vehicle after it has been installed, the ground wire should be the last
wire disconnected from the amplifi er--just the opposite as when you installed it.
KICKER ZISL
source unit high-level
speaker outputs
OR
to amplifi er
protection LED
2010 ZXM 450.2 RevC.indd 3
2010 ZXM 450.2 RevC.indd 3
10/29/2009 12:58:33 PM
10/29/2009 12:58:33 PM
