Page 4 of 8
Fig. 10
Fig. 11
20.
Install one of the self stripping t-tap connectors on to each wire. Lay the wire in the open channel, fold
the connector body over and squeeze with a pair of pliers until connector snaps shut. Fig. 10
21.
Connect the subwoofer harness input wires to the t-tap connectors. The green wire (positive) of the
harness connects to the t-tap connector on the gray wire with the yellow stripe in the vehicle. The
brown wire (negative) of the harness connects to the t-tap connector on the gray wire with the purple
stripe in the vehicle.
Subwoofer Input Connection with optional five-channel amplifier installed
22.
Connect the green wire of the of the subwoofer harness to the green wire of the 4.1 amplifier harness.
Connect the brown wire of the subwoofer harness to the brown wire of the 4.1 amplifier harness.
Subwoofer Input Connection for Premium Audio vehicles with factory eight-channel amplifier installed
23.
Locate the 16 pin connector on the amplifier behind the left front speaker housing. Find the
green/brown stripe wire and the gray/brown strip wire in this connector and install one of the self
stripping t-tap connectors on to each wire. Lay the wire in the open channel, fold the connector body
over and squeeze with a pair of pliers until connector snaps shut. Fig. 10
24.
Connect the green wire of the subwoofer harness to the gray/brown strip wire. Connect the brown
wire of the subwoofer harness to the green/brown stripe wire.
25.
Install the supplied two pin connector by inserting the terminal on the end of the power wire into the
back of the connector until it clicks and locks. Fig. 11
26.
Depress the blue terminal retainer down in the center of the connector.
27.
Remove the bolt securing the support brace under the steering column and connect the ground wire
as shown in Fig. 12. Torque to 8Nm.
Fig. 12
