Kicker SOLOX, Техническое руководство

Страница: 29 / 36

Installing This Bad Boy
Kicker SoloX Subwoofers
Recommended Applications
Page 29
6. Once the holes are marked remove template.
Using a jigsaw cutout the woofer hole and use a
3/8” drill bit for the mounting holes. Fig.7
ACHTUNG! ATTENTION!
You will need assistance for the following steps!
7. Insert the SPLAT into the cutout and move into
position. We know what your thinking ...How can
this fit in through the hole. Relax tried it once and
it worked, so we put it into production! Fig.8
8.Use masking tape to temporarily hold the SPLAT
in place while securing the BAM. This tape can be
removed after the corner hardware has been
started. Fig.9
9. With your assistant, insert the BAM and start
the corner hardware. Now is the time you remove
the unidirectional bonding strip! (Tape) Tighten
the double threaded studs to secure the BAM to
the baffle. Now take inventory to make sure noth-
ing dropped on the floor while wrestling the big
unit into position. Fig.10
Baffle
Fig.7
Fig.8
Fig.9
Fig.10