Kicker SOLOX, Техническое руководство

Страница: 28 / 36

Unwrapping and Installing This Bad Boy
Kicker SoloX Subwoofers
Recommended Applications
Page 28
Now that you have read “The Adventures of Sam
Stikman” again and decided on which enclosure
design to use, you may now remove the SoloX
from it’s box. Please follow the instructions lined
out here to insure proper installation. Have you
found the “Optional” DVD yet? We haven’t either!
Huh, must be part of the STXL package!
1. With assistance from a friend (or an engine
hoist) remove the SoloX from the cardboard facili-
tation chamber or “box” if you will. Fig. 1
2. Once out of the carton remove the (4) four
acorn head nuts and (8) eight bolts securing the
SPAIR to the BAM and wood baffle assembly. Place
SPAIR in safe clean location! This does not mean
on the floor next to the car where it gets kicked
and tripped over everytime you walk by. Fig.2
ATTENTION!
3. Install the Gap Cap into the BAM around the
pole-piece to protect the motor assembly from
debris while you are installing the woofer. If any
metal shavings were to fall into the gap, they
would be impossible to remove! Please use the
Gap Cap! If this were not important we would
have taken the money we spent to design and
produce them and bought a spa for the tech bay!
So use the cap ! Fig.3
4. With the Gap Cap now installed remove the (4)
double end threaded studs that lock the BAM to
the wood baffle assembly. Be careful not to let
the SPLAT fall on you foot otherwise... you
guessed it, splat! Fig.4
The SPLAT and wood baffle will now come free
from the BAM. The baffle will now become your
mounting template. Fig.5
5. Place the wood template on your enclosure
baffle to mark the holes for mounting. Make sure
it is in the correct spot before you start cutting.
Remember, “Cut twice, but only mark once!” Fig.6
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
Fig.6