Page 7 of 10
Fig. 23
Fig. 25
Fig. 26
37.
Reinstall all previously removed parts in reverse order.
38.
Run the wire harness along the floor under the rear seats to approximately the middle of the vehicle
and pull the end of the harness under the seat to the cargo area. Fig. 25
39.
Set the subwoofer in place and connect the wire harness.
40.
Rotate the rear seat back until it is nearly vertical. While holding the seat back with one hand, slide
the enclosure back until the hooks on the bracket are centered under the anchor points at the
bottom of the seat. Slowly rotate the seat back toward the rear of the vehicle until it locks into place.
Fig. 26
41.
Reinstall all previously removed parts in reverse order.
42.
Install supplied fuses in the fuse holders under hood.
43.
Reconnect the negative battery cable. Torque to 5Nm.
Fig. 24