6
iK
150
DIGITAL
STEREO
SYSTEM
with ALARM
USING THE ALARMS
• Tap the
alarm1
or
alarm2
button to turn each alarm on and off.
• Use the quickstart on page 5 for instructions on how to set an alarm.
• You can set the alarm source to DOCK, FM1, FM2, AM, or buzzer.
• When an alarm goes off, hit the
SNOOZE
button to silence the alarm for 9 minutes.
USING THE RADIO
To improve FM/AM radio reception, connect the included FM antenna to the coaxial jack on the rear of the
iK150 and/or the included AM Loop antenna to the AM terminals on the rear of the iK150. You may need
to experiment with antenna angle/position for optimal reception.
• Source to FM1, FM2, or AM (see page 5 for instructions).
• Tap the navigation knob to display radio station; rotate the knob to adjust radio frequency.
• Use the and buttons to seek to the next strongest station.
• Store the current station in memory by holding any of the
m1
–
m4
buttons.
• Recall a stored station by tapping the
m1
–
m4
memory button to which it is assigned.
• Tap the
SNOOZE
button to mute/unmute.
Setting the Radio Region
1. Press
setup
then
source
within one second.
2. Rotate the navigation knob to select between Region 1 and 2.
3. Press the navigation knob to save.
Region 1: All countries except North America and the Caribbean
Region 2: North America (USA & Canada) and the Caribbean
USING YOUR iPod WITH THE iK150
• Insert your iPod into the iK150 dock before turning on the iK150.
• Turn off the iPod’s SoundCheck option for optimal sound quality.
• The use of a dock adapter plate with your iPod is not required. Installing an adapter plate
along with the included isolation bracket will provide a more secure fi t for your iPod,
reducing vibration.
• Third Gen and older iPods work by connecting their headphone output to the auxiliary
input on the rear of the iK150.
• Tap the
SNOOZE
button to mute/unmute.
2009 iK150 Multilingual i01.indd 6
2009 iK150 Multilingual i01.indd 6
6/23/2009 11:44:17 AM
6/23/2009 11:44:17 AM