3
POWER
PROTECTION
+
-
12V
SPEAKER
GND REM +12V
Model
External Fuse
(sold separately)
Power/Ground Wire
KICKER Wiring Kit
DX500.1
1 x 50 Ampere
4 Gauge
PK4, CK44, ZCK44
DX1000.1
1 x 100 Ampere
4 Gauge
PK4, CK44, ZCK44
installation by using a KICKER ZISL
as shown below. Either input method will provide a low-level output signal
at the RCA output, which effectively passes the audio signal to another amplifi er or component. Keep the audio
signal cable away from factory wiring harnesses and other power wiring. If you need to cross this wiring, cross it
at a 90 degree angle.
source unit
high-level speaker
outputs
to amplifi er
shield
+
–
core conductor
battery
external fuse
remote turn-on
(see page 5)
bare-metal
chassis ground
18”
(45cm)
24”
(60cm)
Install a fuse within 18” (45cm) of the battery and in-line with the power cable connected to your amplifi er. If you
ever need to remove the amplifi er from the vehicle after it has been installed, the ground wire should be the last
wire disconnected from the amplifi er--just the opposite as when you installed it.
KICKER ZISL
source unit high-level
speaker outputs
OR
to amplifi er
woofer
2010 DX Mono Amps RevD.indd 3
2010 DX Mono Amps RevD.indd 3
11/10/2009 5:15:28 PM
11/10/2009 5:15:28 PM
