EOP2021-CS4
7/6/2021
REV-A.3
47KSMT25 Installation Guide
Page
2
of
8
The Kicker KSMT25 pod provides a mid and tweeter with optimized adjustability. The pod can
be mounted to almost any surface where a hole can be drilled. Not only does the entire pod
assembly pivot, lean, and rotate on the ball and socket mounting stud - the tweeter also has
approximately 260 degrees of planetary rotation around the mid to provide desired orientation.
This document demonstrates adjusting, mounting, and wiring of the KSMT25 pod assembly for
the following Kicker models:
•
47KSMT2504
PARTS IDENTIFICATION
Below is a list describing part names used in these instructions.
(1)
KSMT25 pod assembly
(2)
Tweeter
(3)
Mid
(4)
Mounting Stud
(5)
Decorative Plug
(6)
Washer
(7)
Wing Nut
(1)
(2)
(3)
(4)
(5)
(6)
(7)
