ASSEMBLY INSTRUCTIONS
5
4. Pass canopy (A) over the long machine
screws (DD) protruding from the mounting
bracket (B) and secure in place with threaded
knobs (CC).
x 2
CC
Threaded
Knobs
Hardware Used
3. Mounting surface should be clean, dry, flat and
1/4 in. larger than the canopy (A) on all sides.
Any gaps between the mounting surface and
canopy (A) exceeding 3/16 in. should be
corrected as required with silicone caulking
compound. Caulk completely around where the
back of canopy (A) meets the wall surface to
prevent water from seeping into outlet box.
3
A
4
CC
A
B
DD
