Kia XCeed 2020, Руководство пользователя, Страница: 379 / 725

Driving your vehicle Brake system
6
52
Cancel
OCDW059034
• To cancel the Auto Hold operation,
press the Auto Hold switch. The
AUTO HOLD indicator will go out.
• To cancel the Auto Hold operation
when the vehicle is at a standstill,
press the Auto Hold switch while
depressing the brake pedal.
NOTICE
• The Auto Hold does not operate
when:
- The driver’s seat belt is
unfastened and driver’s door is
opened.
- The engine hood is opened.
- The trunk is opened.
- The shift lever is in P (Park).
- The EPB is applied.
• For your safety, the Auto Hold
automatically switches to EPB in
such cases:
- The driver’s door is opened.
- The engine hood is opened.
- The trunk is opened.
- The vehicle is in a standstill for
more than 10 minutes.
- The vehicle is standing on a
steep slope.
- The vehicle moved several times.
In these cases, the brake
warning light comes on, the
AUTO HOLD indicator changes
from green to white, and a
warning sounds and a message
will appear to inform you that
EPB has been automatically
engaged. Before driving off
again, press foot brake pedal,
check the surrounding area near
your vehicle and release parking
brake manually with the EPB
switch.
• If the AUTO HOLD indicator lights
up yellow, the Auto Hold is not
working properly. In this case,
have your vehicle inspected
by a professional workshop.
Kia recommends to contact an
authorized Kia dealer/service
partner.
• While operating Auto Hold, you
may hear mechanical noise.
However, it is normal operation
noise.
WARNING
• Press the accelerator pedal slowly
when you start the vehicle.
• For your safety, cancel the Auto
Hold when you drive downhill or
back up the vehicle or park the
vehicle.