Kia XCeed 2020, Руководство пользователя, Страница: 194 / 725

Features of your vehicle Parking distance warning-reverse
4
96
will operate normally when the
material is removed or the sensor
is no longer blocked.)
3. Driving on uneven road surfaces
(unpaved roads, gravel, bumps,
gradient).
4. Objects generating excessive noise
(vehicle horns, loud motorcycle
engines, or truck air brakes) are
within range of the sensor.
5. Heavy rain or water spray exists.
6. Wireless transmitters or mobile
phones are within range of the
sensor.
7. The sensor is covered with snow.
8. Trailer towing
The detecting range may decrease
when:
1. The sensor is stained with foreign
matter such as snow or water.
(The sensing range will return to
normal when removed.)
2. Outside air temperature is
extremely hot or cold.
The following objects may not be
recognized by the sensor:
1. Sharp or slim objects such as
ropes, chains or small poles.
2. Objects which tend to absorb the
sensor frequency such as clothes,
spongy material or snow.
3. Undetectable objects smaller than
1 m (40 in.) in height and narrower
than 14 cm (6 in.) in diameter.
Parking distance warning-reverse
precautions
• The parking distance warning-
reverse may not sound
consistently depending on the
speed and shapes of the objects
detected.
• The parking distance warning-
reverse may malfunction if the
vehicle bumper height or sensor
installation has been modified
or damaged. Any non-factory
installed equipment or accessories
may also interfere with the sensor
performance.
• The sensor may not recognize
objects less than 30 cm (12 in.)
from the sensor, or it may sense
an incorrect distance. Use caution.
• When the sensor is frozen or
stained with snow, dirt, or water,
the sensor may be inoperative
until the stains are removed using
a soft cloth.
• Do not push, scratch or strike
the sensor. Sensor damage could
occur.
NOTICE
This system can only sense objects
within the range and location of the
sensors, It can not detect objects
in other areas where sensors are
not installed. Also, small or slim
objects, such as poles or objects
located between sensors may not be
detected by the sensors.