Kia stinger 2022, Руководство по функциям и возможностям, Страница: 51 / 70

SEATING
SEA
TING
Driver Position Memory System *
The integrated system stores into memory the position of the
driver’s seat, outside rearview mirrors, steering wheel positions
and seat cushion extension* . To store positions into memory,
first place the gear shift into P (Park) while the Engine Start/
Stop button is in the ON position . Then:
1 . Adjust the driver’s seat, outside rearview mirrors, settings
and steering wheel positions
2 . Press the SET button B on the control panel . System will
beep once
3 . Press one of the memory buttons 1 or 2 C within 4 seconds .
The system will beep twice when memory has been stored
(Located on driver’s door control panel)
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE
OPERATING INFORMATION AND SAFETY WARNINGS .
†
LEGAL DISCLAIMERS ON BACK INSIDE COVER
*IF EQUIPPED
49
REMINDERS:
• Button may be hard to see if headrest is in its lowest position
•
Do not operate the vehicle with the headrests removed . Headrests can provide critical
neck and head support in an accident . Do not attempt to adjust the seat while the
vehicle is moving . This could result in loss of control of the vehicle .
See section 3 in the Owner’s Manual for more information .
REMINDER:
Do not operate the vehicle with the headrests removed . Headrests can provide critical neck and head support
in an accident .
See section 3 in the Owner’s Manual for more information .
To raise headrest: Pull headrest up .
To lower headrest: Press the lock button A , then press the
headrest down .
Front Seat Headrest Adjustment
†11
A
B
C
•
For easy adjustments, hold a headrest post
with one hand while using the other hand to
pull the headrest from underneath
QUICK TIP