Kia stinger 2022, Руководство по функциям и возможностям, Страница: 21 / 70

A
DA
S
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
Smart Cruise Control (SCC)
†6
(Continued)
REMINDERS:
•
CRUISE indicator must be ON in order to operate SCC
•
SCC remains ON when ignition is cycled . The speed setting will need to be reset when ignition is cycled
• The distance settings are approximations and may vary depending on vehicle speed . See the owner’s manual for more
information
• SCC is also canceled when the driver’s door is opened, gear shift is changed out of D (Drive), Electronic Parking Brake
(EPB) is activated and various other conditions . See owner’s manual for other conditions
•
If SCC is left on, it can be activated inadvertently . Keep the system off when not in use to avoid setting a speed which the
driver is not aware of
•
SCC is a supplemental system and is not a substitute for safe driving . It is the responsibility of the driver to always check
the speed and distance to the vehicle ahead
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE
OPERATING INFORMATION AND SAFETY WARNINGS .
†
LEGAL DISCLAIMERS ON BACK INSIDE COVER
*IF EQUIPPED
19
• If your vehicle speed is between 0-20 mph when you press the Driving Assist button to turn SCC on, the set speed
will be set to 20 mph
•
When following a vehicle, the system can automatically adjust your cruise speed based on the vehicle detected in
front . It will even bring the vehicle to a complete stop if necessary . If the vehicle remains at a standstill for more than
3 seconds, you must depress the accelerator pedal or press the RES+/SET- button up/down to start the vehicle
• To change the cruise control mode from SCC to standard cruise control, press and hold button F . Repeat to switch
back to SCC mode . (SCC must not be activated to change modes)
QUICK TIPS