Kia Stinger 2017, Руководство пользователя, Страница: 48 / 58

*IF EQUIPPED
A
C
B
A
Pre-Safe Seat Belt (PSB)*
The Pre-Safe Seat Belt (PSB) will activate and pull the seat
belt into tighter contact against the occupant’s body if a
collision is detected or during certain driving maneuvers.
The PSB system operates as below:
§
The seat belt may tighten when:
- The vehicle senses a collision
- An emergency braking situation occurs
- There’s a loss of vehicle control
REMINDERS:
The Pre-Safe Seat Belt warning light will illuminate
on LCD screen if there is a problem with the system.
Have the system checked if:
- The warning light does not turn on briefly when
you turn the Engine Start/Stop button to the ON
position
- The warning light stays on after illumination for
approximately 3 seconds
- The warning light comes on while the vehicle is
in motion
Seat Belts
To properly fasten your safety belts:
1. Insert the belt tongue plate A into the buckle until it clicks
2. Position the lap portion of the belt across your lap as
LOW ON THE HIPS as possible C . Adjust the belt to a
SNUG FIT by pulling up on the shoulder portion B
Seat Belt Retractor Locks
Retractor locks allow lap/shoulder safety belts to remain
unlocked during normal vehicle operation for freedom of
movement and increased comfort.
During a STRONG STOP, SUDDEN TURN OR CERTAIN
COLLISIONS, seat belt retractors will automatically lock
the belts to help reduce the risk of injury.
For more detailed information regarding your vehicle’s
safety belts, please refer to your Owner’s Manual
and the separate brochure titled “Understanding Your
Safety Belt & Supplemental Restraint System.”
Quick Tip
The seat belt warning chime operates for the
driver’s seat only.
REMINDER: For maximum protection, always wear
your seatbelt
46
SAFETY FEATURES