Kia Stinger 2017, Руководство пользователя, Страница: 15 / 58

DRIVER’S PANEL
13
*IF EQUIPPED ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
(Button located on driver’s panel, left of the steering wheel)
(Blind-spot area
monitoring)
(Vehicle
approaching
at high speed
monitoring)
BLIND-SPOT
COLLISION
WARNING VIDEO
To view a video on
your mobile device,
snap this QR Code
or visit the listed
website. Refer to
page 2 for more
information.
Rear Cross-Traffic Collision Warning (RCCW)
BCW / Lane Change Assist (LCA)
With the Engine Start/Stop button in the ON position, press
the BCW button
A to turn the system ON. The button light
will illuminate.
1st-stage alert: When another vehicle is detected within
the BCW system warning boundary B , a yellow indicator
will illuminate on the outside rearview mirrors C .
2nd-stage alert:
When 1st stage alert is on and the
driver activates a turn signal, a flashing yellow indicator
will illuminate on the outside rearview mirrors and the
system will sound an alert.
D
Blind-Spot Collision Warning (BCW)
The Blind-Spot Collision Warning (BCW) system uses radar
sensors in the rear bumper to monitor and warn the driver of
an approaching vehicle in the driver’s blind spot area.
The system will activate when the vehicle is traveling more
than 20 mph and will alert the driver if another vehicle is
detected by the radar sensor.
REMINDERS:
- The BCW system will not issue a warning if
the vehicle speed is 6 mph or more above the
surrounding vehicles
- When the BCW is ON and the ignition is cycled,
the BCW system returns to its previous state
If the Rear Cross-Traffic Collision Warning (RCCW) system
sensors detect vehicles approaching from the left or right
side
D , the system will sound an audible alert, the warning
indicators on the outside rearview mirror will illuminate and a
message will appear on the LCD screen, under these conditions:
§ When the vehicle is in Reverse
§
When the vehicle moves backwards from a parked position
§ When the vehicle is moving less than 6 mph
Quick Tip
The BCW system will activate when:
1. The system is turned on
2. Vehicle speed is above approximately 20 mph
3. Other vehicles are detected on the rear sides of
the vehicle
REMINDER:
The RCCW feature can be turned
OFF/ON in User Settings. When vehicle power is
cycled, the RCCW will remain in the previous state
C
A
www.youtube.com/KiaFeatureVideos
B