manualshive.com logo in svg

Kia Sportage 2010, Руководство пользователя, Страница: 176 / 371

Поделиться
Скачать
Kia Sportage 2010 Скачать руководство пользователя страница 176

4 29

Driving your vehicle

1

2

3

4

5

6

7

8

9

To decrease the cruising
speed:

Follow either of these procedures:
• Push down the - / SET switch and

hold it. Your vehicle will gradually
slow down. Release the switch at
the speed you want to maintain.

• Push down the - / SET switch and

release it immediately. The cruising
speed will decrease 1.6 km/h (1
mph) by one touch and will be
memorized to the reset speed.

To resume cruising speed at
more than 40 km/h (24 mph):

If any method other than the
CRUISE ON-OFF switch was used
to cancel cruising speed and the sys-
tem is still activated, the most recent
set speed will automatically resume
when the + / RES switch is pushed
up.
It will not resume, however, if the
vehicle speed has dropped below 40
km/h (24 mph).

8KMB2187

8KMB2189

Содержание Sportage 2010




















































































































































































































































































































































































Отзывы:

Нет отзывов