Kia Sportage 2010 Скачать руководство пользователя страница 172

Страница: 172 / 371

4 25

Driving your vehicle

To change the steering wheel angle,
pull down (

➀

) the lock release lever,

adjust the steering wheel to the
desired angle (

➁

), then pull up the

lock-release lever to lock the steering
wheel in place.
Be sure to adjust the steering wheel
to the desired position before driving.

Horn

To sound the horn, press the horn
symbol on your steering wheel.
Check the horn regularly to be sure it
operates properly.

OKM049087

CAUTION -

Horn

• To sound the horn, press the

area indicated by the horn
symbol on your steering
wheel (see illustration). The
horn will operate only when
this area is pressed.

• Do not strike the horn severely

to operate it, or hit it with your
fist. Do not press on the horn
with a sharp-pointed object.

OKM039088

Содержание Sportage 2010




















































































































































































































































































































































































Результаты поиска

Содержание Sportage 2010

Отзывы:

Kia Sportage 2010, Руководство пользователя, Страница: 172 / 371

Результаты поиска

Содержание Sportage 2010

Отзывы: