CENTER PANEL
CEN
TER
PA
N
EL
(Located below left of Rotary Dial Shifter Knob)
Electronic Parking Brake (EPB)
Auto Hold
The Electronic Parking Brake (EPB) system utilizes an electric
motor to engage the parking brake.
Applying the Parking Brake
Pull up the EPB switch
A
. Ensure that the indicator light
is illuminated on the instrument cluster.
Releasing the Parking Brake
The EPB will automatically release when the shifter is placed
in Reverse or Drive.
To release EPB manually, depress the brake pedal, then press
the EPB switch
A
down, with the ignition switch in the ON
position. Ensure that the indicator light
is OFF.
REMINDERS:
•
As a bulb check, the EPB malfunction indicator will illuminate for approximately
3 seconds when the ignition switch is turned ON
•
If the warning light does not illuminate temporarily, or continues to remain lit,
take your vehicle to an authorized Kia dealer and have the system checked
•
The EPB should not be operated while the vehicle is moving
•
A click or electric brake motor sound may be heard while operating or
releasing the EPB, but these conditions are normal and indicate that the EPB is
functioning properly
REMINDERS:
•
To reduce the risk of an accident, do not
activate Auto Hold while driving downhill,
backing up or parking your vehicle
•
Do not solely rely on the Auto Hold system to
keep the vehicle stopped. Always pay attention
to traffic and road conditions, and be prepared
to depress the brakes
•
Auto Hold turns off when ignition is cycled
•
•
When leaving your keys with parking lot attendants or valet,
make sure to inform them how to operate the EPB
•
If parked on a steep incline/decline, pull up the EPB switch for
more than 3 seconds for a firmer EPB application
•
Pull up and hold EPB switch again to increase brake pressure if
parked on a decline or incline
QUICK TIPS
N
P
P
RELEASE
AUTO
HOLD
DRIVE
MODE
D
R
Auto Hold temporarily maintains the vehicle at a standstill
even if the brake pedal is released. Auto Hold can be
turned ON/OFF using the AUTO HOLD switch
B
on the
center panel. Before Auto Hold will operate, the driver’s
door, engine hood and trunk must be closed, and the
driver’s seat belt must be fastened.
The Auto Hold indicator has four states:
Standby (white): With vehicle in Park and at a standstill,
and AUTO HOLD switch
B
turned ON, the indicator will
illuminate white. While driving the vehicle (vehicle is not
at a standstill), the Auto Hold indicator will remain white.
Engaged (green): When coming to a complete stop and depressing the brake pedal, the
Auto Hold indicator changes from white to green.
OFF (not illuminated): The indicator will turn OFF when the AUTO HOLD switch
B
is
turned OFF or when the EPB is manually turned ON.
Malfunction (yellow): When the indicator is illuminated yellow, there may be a system
malfunction. Take your vehicle to a local Kia dealer.
Refer to the inside front cover for
more information on QR codes.
www.youtube.com/KiaFeatureVideos
QR CODES
Electronic Parking Brake
Video
Refer to section 5 in the Owner’s Manual for more information.
Refer to section 5 in the Owner’s Manual for
more information.
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
*IF EQUIPPED
47
A
B