*IF EQUIPPED †LEGAL DISCLAIMERS ON BACK INSIDE COVER
30
NIRO EV
F E A T U R E S & F U N C T I O N S G U I D E
E
A
F
D
B
The Smart Cruise Control with Stop & Go* system is designed to maintain a predetermined distance from vehicles detected ahead
by automatically adjusting the driving speed as needed. When traffic is detected, the vehicle will automatically slow to maintain a
set distance between traffic without depressing the accelerator or brake pedal.
When SCC is on and activated, the vehicle distance set, and the system detects a vehicle slowing or stopping, the system can bring
the vehicle to a complete stop. When the vehicle ahead starts to move forward, the SCC system re-engages. If the vehicle ahead
stops for more than 3 seconds, the accelerator pedal or the RES+ button must be pressed to start moving the vehicle.
On some models, press the Driving Assist Mode
button* on the Steering Wheel to activate and the speed will be set to the
current vehicle speed. SCC may decrease the speed to maintain the distance with the vehicle in front.
To set/adjust the SCC speed:
•
Push the Driving Assist
CRUISE
/ Driving Assist Mode
button*
A
to turn the system ON & set the current speed
(One-Touch Set). The cruise indicator will illuminate on the instrument cluster
•
Accelerate/decelerate to the desired speed and press lever
B
down to set the speed
•
Press the RES+/SET- (+/-) button*
B
up/down to increase/decrease the set speed
•
The SET indicator light, set speed and vehicle distance will illuminate on the instrument cluster’s LCD screen
C
To set the vehicle distance:
Press the Vehicle Distance button
D
on the steering wheel. The image on the LCD screen
C
will change when scrolling through
the settings. Each time the button is pressed, the vehicle distance changes.
To cancel or pause SCC operation:
Press the CANCEL* or pause
button*
B
. The cruise indicator on the instrument cluster will turn OFF.
To turn SCC OFF:
Press the Driving Assist
CRUISE
/ Driving Assist Mode
button
A
. The cruise indicator on the instrument cluster will turn OFF.
To adjust the sensitivity of the SCC system:
Press the mode
button
E
on the Steering Wheel. With the OK button
F
, select
Driver Assistance, then SCC Response. Then select Fast, Normal or Slow.
To change the cruise control mode
from SCC to standard cruise
control, press and hold button
A
. Repeat to switch back to SCC
mode (The SCC system must not be activated to change modes.
Some Kia models use the CRUISE button).
The SCC system is a supplemental system and is not a substitute for safe driving. It is the
responsibility of the driver to always check the speed and distance to the vehicle ahead.
See section 5 in the Owner’s Manual for more information. Images are for illustrative
purposes only and may not reflect actual feature or operation.
Smart Cruise Control (SCC) with Stop & Go
*
†7,20
Refer to the inside front cover for
more information on QR codes.
www.youtube.com/KiaFeatureVideos
QR CODES
Smart Cruise Control
with Stop & Go Video
CRUISE
100
MPH
CRUISE
100
MPH
CRUISE
60
MPH
CRUISE
100
MPH
Smart Cruise Control
Mode
Cruise Control Mode
The distance settings are approximations
and may vary depending on the vehicle
speed at the time.
172ft
130ft
82ft
106ft
(Type B Steering Wheel shown;
buttons located on right side of
Steering Wheel)
C
ST
EER
IN
G W
HEEL
CON
TR
OL
S
STEERING WHEEL CONTROLS