Kia K2500 2014, Руководство пользователя, Страница: 28 / 262

3 19
1
2
3
4
5
6
7
8
9
Knowing your vehicle
WARNING
- Australian
design rules
• Seatbelts are designed to bear
upon the bony structure of the
body, and should be worn low
across the front of the pelvis
or the pelvis, chest and shoul-
ders, as applicable; wearing
the lap section of the belt
across the abdominal area
must be avoided.
• Seatbelts should be adjusted
as firmly as possible, consis-
tent with comfort, to provide
the protection for which they
have been designed. A slack
belt will greatly reduce the
protection afforded to the
wearer.
• Care should be taken to avoid
contamination of the webbing
with polishes, oils and chemi-
cals, and particularly battery
acid. Cleaning may safely be
carried out using mild soap
and water.
(Continued)
(Continued)
• The belts should be replaced
if webbing becomes frayed,
contaminated or damaged.
• It is essential to replace the
entire assembly after it has
been worn in a severe impact
even if damage to the assem-
bly is not obvious.
• Belts should not be worn with
straps twisted.
• Each belt assembly must only
be used by one occupant; it is
dangerous to put a belt
around a child being carried
on the occupant’s lap.
• No modifications or additions
should be made by the user
which will either prevent the
seat belt adjusting devices
from operating to remove
slack, or prevent the seat belt
assembly from being adjusted
to remove slack.
WARNING
- After a colli-
sion
• Lap/shoulder belt assemblies
may be stretched or damaged
when subjected to the stress
and forces of a collision.
• The entire restraint system
should be inspected following
any collision. All belts, retrac-
tors, anchors and hardware
damaged by a collision should
be replaced before the vehicle
is operated again.