AUX PLAYER
⑨
AUX CONNECTOR (AUX)
It is possible to connect your portable media player to the car audio system for playback of
the audio tracks via the car speakers.
To get the best results when connecting the portable media to the car audio system, follow
these steps:
1) Use a 3.5mm stereo plug cable to connect the media player headphone socket to
the radio.
2) Adjust the portable media player to approximately 3/4 volume and start playback.
3) Press the button
⑥
on the car radio until the display shows
AUX MODE
.
4) The volume and tone can now be adjusted on the radio to the desired level.
Note:
a.
The audio quality of your media player and the audio tracks on it may not be of the
same sound quality as the car audio system's CD player.
b.
If the sound of the media player is too low compared with the radio or CD, increase
the volume of the player.
c.
If the sound of the media player is too loud and/or distorted, decrease the volume of
the player.
d.
When in AUX MODE, only the VOLUME, BASS, MID, TREBLE, EQ, and MODE
functions of the car audio set can be used.
e.
For technical information regarding the AUX input, refer to the specification section
at the end of this manual.
⑨
Your portable
Media Player
30