Kia Cerato 2022, Руководство пользователя, Страница: 310 / 622

Driving your vehicle
36 6
Intelligent variable transmission (IVT)
- Upshifts are delayed when acceler
-
ating.
僅 In manual mode, the fuel efficiency
may decrease.
Shift lock system (if equipped)
For your safety, the Intelligent Variable
Transmission (IVT) has a shift lock sys
-
tem which prevents shifting the trans
-
mission from P (Park) into R (Reverse)
unless the brake pedal is depressed.
To shift the transmission from P (Park)
into R (Reverse):
1. Depress and hold the brake pedal.
2. Start the engine or turn the ignition
switch to the ON position.
3. Move the shift lever.
If the brake pedal is repeatedly
depressed and released with the shift
lever in the P (Park) position, a chatter
-
ing noise near the shift lever may be
heard. This is a normal condition.
WARNING
Always fully depress the brake pedal
before and whilst shifting out of the P
(Park) position into another position to
avoid inadvertent motion of the vehicle
which could injure persons in or around
the vehicle.
Shift-lock override
If the shift lever cannot be moved from
the P (Park) position into R (Reverse)
position with the brake pedal depressed,
continue depressing the brake, and then
do the following:
1. Remove the shift lever boots from the
console by using a plastic trim tool.
2. After removing the boots, press and
hold the button (1) on the left front
side with a pointed tool and change it
to the N (Neutral) position.
If the shift lever does not move even
after performing this procedure, have
the system inspected by a professional
workshop. Kia recommends to visit an
authorised Kia dealer/service partner.
CAUTION
僅 Be careful not to damage the cover
when removing the shift lever boots.
僅 Be sure that the vehicle is in flat level
ground when releasing the shift-lock.
Good driving practices
僅 Never move the shift lever from P
(Park) or N (Neutral) to any other
position with the accelerator pedal
depressed.
OBD051006R