CADENZA
F E A T U R E S & F U N C T I O N S G U I D E
38
*IF EQUIPPED †LEGAL DISCLAIMERS ON BACK INSIDE COVER
How to Sync Transmitter with HomeLink
®
If programming for the first time, begin with Step 1 (repeating
this step will delete all information)
To program non-rolling and rolling code garage door openers
and other devices:
1 Press and hold the left
A
and center
D
buttons
simultaneously until the indicator light
C
begins to flash (to
reprogram buttons, skip this step)
2 Press and hold the desired button
A
,
B
or
D
and hold
the button on the transmitter while it is approximately 1 to 3
inches away from the mirror The HomeLink
®
Indicator light
C
will flash rapidly once the frequency signal has been
successfully programmed
To finish programming rolling code garage door openers,
complete these steps:
3 Locate the “learn” or “smart” button on the garage door’s
motor head unit Press and release the button and complete Step 4 within 30 seconds
4 Firmly press and release the programmed HomeLink
®
button up to three times
Operating HomeLink
®
:
Press one of the programmed HomeLink
®
buttons
Erasing programmed buttons:
Press and hold the left
A
and center
D
buttons
simultaneously for approximately 20 seconds, and then release both buttons within
30 seconds
A
B C
D
E
F
G
HomeLink
®
†13
with Auto-Dimming
Rearview Mirror
*
A
HomeLink
®
button
B
HomeLink
®
button
C
Indicator light
D
HomeLink
®
button
E
Glare detection sensor
F
Automatic dimming ON/OFF
G
Compass control button
The HomeLink
®
/ Auto-Dimming Rearview Mirror is
designed to reduce glare from a vehicle’s headlights
located in the rear and also connect up to three
electronic transmitters into one location
REMINDER:
Mirror indicator light
C
will illuminate when automatic
dimming is ON
•
You can reprogram a single HomeLink
®
button by repeating Step 2
•
Erasing programmed buttons will delete all
trained transmitters
QUICK TIPS
HomeLink Setup
Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website Refer to page 2 for
more information
QR CODE
www.youtube.com/KiaFeatureVideos
If your garage door opener was manufactured in 2011
or later, and you’re unable to program your vehicle’s
HomeLink
®
system, you may need to purchase a
HomeLink Repeater Kit. For more information, go to
www.HomeLink.com or call (800) 355-3515.
OTHER KEY FEATURES
Содержание CADENZA 2019
Страница 1: ......
Страница 50: ...CADENZA F E A T U R E S F U N C T I O N S G U I D E 48 NOTES ...