Kia CADENZA 2019, Руководство по функциям и возможностям

Страница: 24 / 54

CADENZA
F E A T U R E S & F U N C T I O N S G U I D E
22
*IF EQUIPPED †LEGAL DISCLAIMERS ON BACK INSIDE COVER
MODE
CRUISE
CANCEL
RES
OK
SET
CRUISE
60
MPH
(Type B; Buttons located on right side of Steering Wheel)
(Distances are approximate and vary depending on vehicle speed)
(Display on LCD screen)
Smart Cruise Control
(SCC) with Stop & Go
Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information
QR CODE
www.youtube.com/KiaFeatureVideos
A
B
C E
172ft 130ft
82ft
98ft
D
Smart Cruise Control (SCC) with Stop & Go *
†6,24
The Smart Cruise Control (SCC) with Stop & Go system is designed to maintain
a predetermined distance from vehicles detected ahead by automatically
adjusting the driving speed as needed
To set/adjust the SCC speed:
• Push the CRUISE button
A
to turn system ON The CRUISE
indicator will illuminate on the instrument cluster
• Accelerate/decelerate to the desired speed
• Move the SCC lever
B
to set or adjust speed The SET indicator
light, set speed and vehicle-to-vehicle distance will illuminate on
the instrument cluster's LCD screen
To set the vehicle-to-vehicle distance, press the SCC button
C
on the steering wheel The image on the LCD screen
D
will change
when scrolling through the settings Each time the button
C
is pressed,
the vehicle-to-vehicle distance changes
To cancel SCC operation:
Press the CANCEL button
E
or the brake pedal
The LCD screen will display a message that the SCC operation is canceled
To turn SCC system OFF: Press the CRUISE button
A
The CRUISE
indicator on the instrument cluster will turn OFF
To change the Cruise Control mode from SCC to standard Cruise Control, press and
hold button
C
Repeat to switch modes again (The SCC system must not be activated
to change modes)
For the SCC System to operate:
•
When no vehicle is in front, you must be travelling at a minimum speed of 20 mph
•
When following a vehicle, there is no minimum speed requirement
When following a vehicle, the system can automatically adjust your cruise speed based
on the vehicle detected in front It will even bring the vehicle to a complete stop if
necessary
QUICK TIPS
REMINDERS:
•
To turn the SCC ON, press the CRUISE button
•
The SCC system remains ON when ignition is cycled
The speed setting will need to be reset when ignition
is cycled
•
The distance settings are approximations and may
vary depending on factory settings at the time See
owner’s manual for more information
•
The SCC is also canceled when the driver’s door is
opened, gear shift is changed out of D (Drive), EPB is
activated and various other conditions See owner’s
manual for other conditions
•
If the SCC system is left on, it can be activated
inadvertently Keep the system off when not in use to
avoid setting a speed which the driver is not aware of
The SCC system is a supplemental
system and is not a substitute for
safe driving. It is the responsibility of
the driver to always check the speed
and distance to the vehicle ahead.
STEERING WHEEL CONTROLS