Kia 2016 Sedona, Руководство по функциям и возможностям, Страница: 9 / 54

7
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS.
*IF EQUIPPED
(Type B/C clusters):
Driving Assist
•
Smart Cruise Control
Response*
•
Rear Cross Traffic Alert*
•
Forward Collision Warning*
Door/Liftgate (Tailgate)
•
Automatic Unlock
•
Two Press Unlock
•
Horn Feedback
•
Smart Liftgate (Tailgate)*
Lights
•
One-Touch Turn Signal
•
Head Lamp Delay*
• Welcome Light*
Sound
•
Park Assist System Volume*
•
Blind Spot Detection Sound*
•
Welcome Sound*
Seat/Steering
•
Easy Seat Access*
•
Steering Position
Service Interval
•
ON/OFF
•
Set mileage/months
Other Features
•
Fuel Economy Auto
Reset ON/OFF
•
Auto Rear Wiper (Reverse)
•
Fuel Economy Unit
•
Temperature Unit
•
Language
To view these videos on
your mobile device, snap
these QR Codes or visit the
listed website .
Refer to page 2 for more
information .
LCD Display Video
LCD Display:
Maintenance Video
QR CODES
www.KuTechVideos.com/yp13/2016
www.KuTechVideos.com/yp13/2016
(Type B cluster)
(Buttons located on right
side of steering wheel)
A
B
C
User Settings
To enter the User Settings mode in the LCD
Instrument Cluster Modes, press the Mode
button [A] when the vehicle is at a standstill
and with the ENGINE START/ STOP button in
the ON position and select User Settings [~] by
pressing the OK button [B] .
You can navigate the selections on the display
by rolling the OK button [B], and then selecting
the item by pressing the OK button [B] .
Press the Return button [C] to go back to the previous mode/item
User Settings modes
A
B
B
B
C
Service Mode
To enter Service Mode, press the Mode button [A], scroll
to Service Mode [~] by rolling the OK button [B] . Then
press the OK button [B] to enter . System will display
number of miles remaining until next service is due, as
well as the type of service due .
When service is required, the following will be displayed:
Service Required .
To reset the Service Mode system, press and hold the
OK button [B] for more than 1 second .
Press the Return button [C] to go back to the previous
mode/item
To turn Service In OFF, go to User Settings .
Service Interval Setting
To set the service interval in User
Settings mode:
•
Press the Mode button [A]
to cycle to User Settings and
press the OK button [B] to enter
•
If Service Interval is OFF, press
the OK button [B] to turn ON
• Roll the OK button [B] to select/
change the interval setting
•
Press the OK button [B] to
select the interval
C
B
B
A
B
A
B
B
B
B
INSTRUMENT CLUSTER