Kia 2016 Sedona, Руководство по функциям и возможностям, Страница: 40 / 54

SEDONA
F E A T U R E S & F U N C T I O N S G U I D E
38
*IF EQUIPPED
How to Sync Transmitter with HomeLink
®
*
If programming for the first time, begin with Step 1 (repeating this step will
delete all information) .
To program non-rolling and rolling code garage door openers and
other devices:
1 . Press and hold the left [A] and center [D] buttons simultaneously until the
indicator light [C] begins to flash (to reprogram buttons, skip this step)
2 . Press and hold the desired button [A], [B] or [D] and hold the button
on the transmitter while it is approximately 1 to 3 inches away from
the mirror . The HomeLink
®
Indicator light [C] will flash rapidly once the
frequency signal has been successfully programmed
To finish programming rolling code garage door openers, complete
these steps:
3 . Locate the “learn” or “smart” button on the garage door’s motor
head unit . Press and release the button and complete Step 4 within
30 seconds
4 . Firmly press and release the programmed HomeLink
®
button up to
three times
Operating HomeLink
®
:
Press one of the programmed HomeLink
®
buttons .
Erasing programmed buttons:
Press and hold the left [A] and center [D] buttons simultaneously
for approximately 20 seconds, and then release both buttons within
30 seconds .
If your garage door opener was manufactured in 2011 or later, and you’re unable to program
your vehicle’s HomeLink
®
system, you may need to purchase a HomeLink Repeater Kit. For more
information, go to www.HomeLink.com or call (800) 355-3515.
The HomeLink
®
with Auto-Dimming Rearview Mirror* is designed to reduce
glare from a vehicle’s headlights located in the rear and also connect up to
three electronic transmitters into one location .
•
To turn automatic dimming ON, press [~] button [F]
•
To turn automatic dimming OFF, press [~] button [G]
REMINDER:
Mirror indicator light [C] will illuminate when automatic dimming is ON .
HomeLink
®
with Auto-Dimming
Rearview Mirror*
[A] HomeLink ® button
[B] HomeLink
®
button
[C] Indicator light
[D] HomeLink
®
button
[E] Glare detection sensor
[F] Automatic dimming ON
[G] Automatic dimming OFF
•
•
You can reprogram a single HomeLink
®
button by repeating Step 2
•
Erasing programmed buttons will delete all trained transmitters
QUICK TIPS
A B C D E F G
A
A
E
B
A B D
C
C
A
D
F
F
C
G
G
D
D
C
OTHER KEY FEATURES