Kia 2009 H-1 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 336

Kia 2009 H-1 Скачать руководство пользователя страница 31

3 17

Safety features of your vehicle

✽

✽

NOTICE

If you are not able to pull out the safety
belt from the retractor, firmly pull the
belt out and release it. Then you will be
able to pull the belt out smoothly.

Height adjustment (if equipped)

You can adjust the height of the shoulder
belt anchor to one of the 4 positions for
maximum comfort and safety.
The height of the adjusting seat belt
should not be too close to your neck. The
shoulder portion should be adjusted so
that it lies across your chest and midway
over your shoulder near to the door and
not your neck.

To adjust the height of the seat belt
anchor, lower or raise the height adjuster
to an appropriate position.
To raise the height adjuster, pull it up (1).
To lower it, push it down (3) while press-
ing the height adjuster button (2).
Release the button to lock the anchor
into position. Try sliding the height
adjuster to make sure that it has locked
into position.

WARNING

• Verify if the shoulder belt anchor

is locked into position at the
appropriate height.

Never posi-

tion the shoulder belt across your
neck or face.

Improperly posi-

tioned seat belts can cause seri-
ous injuries in an accident.

• Failure to replace seat belts after

an accident could leave you with
damaged seat belts that will not
provide protection in the event of
another collision leading to per-
sonal injury or death.

Replace

your seat belts after being in an
accident as soon as possible.

OSA037040

Front seat

B200A02NF

WARNING

You should place the lap belt por-
tion as low as possible and snugly
across your hips, not on your waist.
If the lap belt is located too high on
your waist, it may increase the
chance of injury in the event of a
collision. Both arms should not be
under or over the belt. Rather, one
should be over and the other under,
as shown in the illustration.
Never wear the arm near the door
side under the seat belt.

«
...
29
30
31
32
33
...
»

Содержание 2009 H-1

















































































































































































































































































































































Отзывы:

Нет отзывов