Kia 2009 H-1 Скачать руководство пользователя страница 143 | Manualshive

Страница: 143 / 336

Kia 2009 H-1 Скачать руководство пользователя страница 143

Features of your vehicle

72

4

D280100AUN

Cigarette lighter (if equipped)

For the cigarette lighter to work, the igni-
tion switch must be in the ACC position
or the ON position.
To use the cigarette lighter, push it all the
way into its socket. When the element
has heated, the lighter will pop out to the
“ready” position.
If it is necessary to replace the cigarette
lighter, use only a genuine KIA replace-
ment or its approved equivalent.

D280200AUN

Ashtray (if equipped)

D280201ASA

To use the ashtray, open the cover.
To remove the ashtray to empty or clean,
pull it up and out.

INTERIOR FEATURES

CAUTION

Only a genuine KIA lighter should
be used in the cigarette lighter
socket. The use of plug-in acces-
sories (shavers, hand-held vacu-
ums, and coffee pots, etc.) may
damage the socket or cause electri-
cal failure.

WARNING

• Do not hold the lighter in after it

is already heated because it will
overheat.

• If the lighter does not pop out

within 30 seconds, remove it to
prevent overheating.

OSA047141

WARNING

- Ashtray use

• Do not use the vehicle’s ashtrays

as waste receptacles.

• Putting lit cigarettes or matches

in an ashtray with other com-
bustible materials may cause a
fire.

OSA040142

«
...
141
142
143
144
145
...
»

Содержание 2009 H-1

















































































































































































































































































































































Отзывы:

Нет отзывов