WireWorks
®
Tech Panel
4. Install lock cams into bottom
horizontal rails by inserting cam
into hole at each end of horizontal
rail. Engage the vertical post and
turn 1/4 turn clockwise using
3
/
16
"
allen wrench.
Figure 6
.
5. Install standard tile hooks where
required on panel.
Figure 6
bottom
horizontal
rail
base raceway
lock
(#46.0053)
base raceway
door
lip of
glide
housing
Figure 7
base
cover lock
plunger
base raceway
door
Figure 8
cover
engages
horizontal
bottom
horizontal
rail
base
raceway
door
Figure 9
Installing Base Raceway
A “One Sided” base raceway may be required to provide
power/data to the opposite side of a Tech Panel. Base
raceway consists of the raceway, base locks and filler
plates (panels 24" and wider only).
1.
Slide the base raceway into place under the panel
with the doors lying in the open position. When the
raceway is centered under the panel around the
glides, snap the trim up over the lip on the glide
housings.
Figure 7.
Hint:
Base raceway installation is made easier if all
glides have been turned down at least
1
⁄
4
".
2.
Push each base cover lock away from the center of
the panel until the plunger pops down into the
locked position.
Figure 8.
To ensure the lock is
engaged, press inward on the lock. It may be
necessary to press down on the plunger to ensure
the lock engages.
3.
Push the door of the base raceway upward until it
engages the lower horizontal.
Figure 9.
The base
cover filler plates remain in position unless a
receptacle is being used in that location. If there is a
receptacle, snap the filler plate out from inside of the
base cover and snap a bezel in its place from the
front of the cover (See
Receptacle/Bezel
Installation,
page 24 of
Panel Installation
Manual
).
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and injury.
lock cam
base tile hooks
bottom horizontal rail
lock cam
