background image

Assemble units as described herein only. To do otherwise 
may result in instability. All screws, nuts and bolts must be  
tightened securely and must be checked periodically after  
assembly. Failure to assemble properly, or to secure parts 
may result in assembly failure and personal injury.

Universal Height-Adjustable Screens - Retrofit Drilling Guidelines

Assembly Instructions

1330 Bellevue Street • P.O. Box 8100 • Green Bay, WI  54308-8100 • Tel 1-800-424-2432 • www.ki.com

© 2017 Krueger International, Inc. All Rights Reserved • Code KI-AI-000017/KI/PDF/1017

1 / ”

1

4

table C

6”

5 / ”

3

8

Drilling Guidelines for Screen Model - USPF2324

6”

5 / ”

3

8

table C

1 / ”

1

4

10

7

/ ”

16

9 / ”

7

8

Drilling Guidelines for Screen Models - USPF2924 & USPF3524

10

7

/ ”

16

9 / ”

7

8

table C

1 / ”

1

4

13

7

/ ”

16

12

7

/ ”

8

Drilling Guidelines for Screen Model - USPF4624

13

7

/ ”

16

12

7

/ ”

8

table C

1 / ”

1

4

22

7

/ ”

16

21

7

/ ”

8

1

/ ”

2

2

1

/ ”

8

Drilling Guidelines for Screen Models - USPF5824 & USPF7024

22

7

/ ”

16

21

7

/ ”

8

Universal Height-Adjustable 

Screen - Retrofit Drilling 

Guidelines

Note: 

If tables do not have  

pre-drilled holes under the 

tabletops for installing screens, 

retrofitting will be required. 

1. Take note of correct retrofit 

drilling guideline illustrations for 

mounting adjustable mechanisms 

to tabletops. Depending on the 

table unit ordered, the length 

of the tabletop determines the 

appropriate size of the Universal 

Height-Adjustable Screen. 

Reference the “Universal  

Height-Adjustable Screen 

Selection Chart” to determine 

appropriate retrofit drilling 

guidelines. 

2. Position the adjustable 

mechanism under the tabletop 

surface at the designated 

location. Using the mechanism 

as a drilling template, mark the 

mounting hole locations, making 

sure the mechanism is parallel to 

the edge of the tabletop. Then use 

an 

1

/

8

” drill to bore pilot holes 

1

/

2

” 

deep at each marked location. 

Table 

Length(s)

Screen 

Model

N/A

USPF2324

30”

USPF2924

36” & 42”

USPF3524

48” & 54”

USPF4624

60” & 66”

USPF5824

70”

USPF7024

Universal Height-Adjustable
Screen Selection Chart 

Содержание USPF2324

Страница 1: ...tant Two different adjustable mechanisms are designed to install for different screen widths weights Each of the two mechanisms is weight balanced differently and is color coded with a different green or yellow round sticker applied under the mounting bracket It is important to reference the Screen Model Mechanism Chart below and use the correct mechanism per the screen model being installed If sc...

Страница 2: ... square holed sleeve long connecting rod installed in step 4 synchronizing the two mechanisms together Secure the mounting bracket of the second mechanism to the underside of the tabletop using four 12 x 1 screws Figure 3 5 Screens installed to tables 60 or greater have three adjustable mechanisms per assembly If assembly contains a third mechanism repeat steps 3 through 4 Assemble units as descri...

Страница 3: ...y or to secure parts may result in assembly failure and personal injury Universal Height Adjustable Screens Assembly Instructions 6 Once all adjustable mechanisms are installed position the screen onto the backs of the vertical rails and align mounting holes Secure screen to the rails using two knurled thumb screws per mechanism Figure 4 Figure 4 adjustable mechanism vertical railway knurled thumb...

Страница 4: ...een Models USPF5824 USPF7024 227 16 217 8 Universal Height Adjustable Screen Retrofit Drilling Guidelines Note If tables do not have pre drilled holes under the tabletops for installing screens retrofitting will be required 1 Take note of correct retrofit drilling guideline illustrations for mounting adjustable mechanisms to tabletops Depending on the table unit ordered the length of the tabletop ...

Отзывы: