Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Padded Topper Installation
(optional)
Note:
The pedestal padded topper is
an optional accessory that must be
ordered separately.
1. Place the padded topper on top of
the corresponding unit. The anti-skid
rubber strips located on the bottom
of the topper keeps sliding of the
topper to a minimum (Figure 2).
Figure 2
padded
topper
pedestal
1330 Bellevue Street • P.O. Box 8100 • Green Bay, WI 54308-8100 • Tel 1-800-424-2432 • www.ki.com
© 2019 Krueger International, Inc. All Rights Reserved • Code KI-AI-000040/KI/PDF/0119
Tattoo
™
Pedestal
Assembly Instructions
Part # 2.57091
