background image

Assemble units as described herein only. To do otherwise 
may result in instability. All screws, nuts and bolts must be  
tightened securely and must be checked periodically after  
assembly. Failure to assemble properly, or to secure parts 
may result in assembly failure and personal injury.

Required Tools

•  12mm Hex Wrench

•  Power Drill Driver

•  #2 Phillips Tip

 

Caster Installation

1. Carefully lay pedestal onto a soft, 

protective surface, on it’s back-side 

as illustrated (Figure 1). 

Note: 

Leg posts are not available on 

pedestals. Four plate-mount casters 

(two locking and two non-locking) 

are provided, and are installed 

directly to the underside of the 

base. A stem-mount caster is also 

provided, and installs to the bottom 

of the drawer face (Detail A). 

2. Align the mounting holes of each 

plate-mount caster with the pilot 

holes on the underside of the 

pedestal, making sure to position 

the two locking caster towards the 

front, user side of the pedestal and 

the non-locking casters at the back. 

Using a #2 Phillips tip and power 

drill driver, secure each caster to the 

underside of the pedestal with four 

#10 x 

1

/

2

” screws (Figure 1 &  

Details A & B).  

3. Using a 12mm hex wrench, fasten 

the stem-mount caster into the 

threaded insert at the underside 

of the pedestal drawer and tighten 

securely (Figure 1 & Detail C). 

4. Once all casters have been installed 

to the underside of the pedestal, 

carefully turn the pedestal to the 

upright position. 

Figure 1

stem-mount

caster

#10 x  / ”

screws

1

2

plate-mount

caster (locking)

plate-mount

caster (non-locking)

Detail C

pedestal

stem-

mount

caster

Detail A

stem-mount

caster (non-locking)

plate-mount

caster (locking)

plate-mount

caster (non-locking)

Detail B

pedestal

plate-mount

caster (locking)

#10 x  / ”

screws

1

2

Assembly Instructions

Tattoo™ Pedestal

 

January 2019

Отзывы: