KI Ruckus Worktable, Руководство по сборке

Страница: 6 / 8

6
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Ruckus ™ Worktable
Assembly Instructions
Door Hinge Adjustment
16. For door height adjustment of
+/-2 mm, loosen the two height
adjust screws on each hinge and
move door up or down. Retighten
screws (Figure 10).
17. For door depth adjustment , first
loosen the depth adjust screw, then
slide the key hole of the hinge to
the desired location. Re-tighten the
screw (Figure 11).
18. For side-to-side adjustment ,
turn the side-to-side adjust screw
in or out. The screw works in
conjunction with the inner leaf of
the hinge arm to move the door
back or forth without a change
in gap between the door and the
cabinet (Figure 12).
19. To disassemble door from
cabinet, press the button on the
rear of the hinge tail inside the unit.
Pull the door slightly forward to
disengage the hinge connection.
Repeat for the other door hinge
to remove the door from the unit
(Figure 13).
Figure 10 - Door Height Adjustment
door
hinge
Figure 11 - Door Depth Adjustment
door
hinge
keyhole
of the
hinge
Figure 12 - Side-to-Side Adjustment
side-to-side
adjust
screw
door
hinge
side-to-side
adjust
screw
door
hinge
Figure 13 - Door Removal
door
hinge
button on the
rear of the
hinge tail