4
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
Ruckus
™
Worktable
Assembly Instructions
Note:
The step below, illustrating
the installation of fixed shelves
may be completed while the unit
is upside-down as shown (adding
more weight to the unit before
flipping it), or installed once
the unit is turned to the upright
position.
9. One at a time, install a fixed shelf
into each of the four openings.
Position the shelf as illustrated
and align the side flange mounting
holes with the corresponding holes
in the center and end panel. Secure
shelf into position using two
#10 x
1
/
2
” Phillips screws at
each side. Repeat procedure for
remaining shelves (Figure 6).
10. Eight coat hooks (four per side)
are supplied for installation to the
worktable. Orient each coat hook
as illustrated, then using #10 x
1
/
2
”
Phillips screws, install the desired
number of coat hooks to pre-drilled
holes in the end panel near the
worksurface (Figure 7).
Figure 6
fixed
shelf
fixed
shelf
#10 x / ”
1
2
phillips
screw
Figure 7
#10 x / ”
1
2
phillips
screws
#10 x / ”
1
2
phillips
screws
coat
hook
coat
hook
end
panel
Содержание Ruckus Worktable
Страница 7: ...7 Ruckus Worktable Assembly Instructions...