Required
Tools
Disassembly Instructions
Material Type:
Warning: This drawing format requires special non-standard fonts!!
Make sure the appropriate font files are installed!!!
TT Humanst 521 BT Light
O HelveticaLTStd-Cond
O HelveticaLTStd-LightCond
Oath
®
Task Chair
Page 2 of 2
Rev. 0
©2018 Krueger International, Inc. All Rights Reserved · KI-DI-000010
A. Steel
B. Wood
C. Plastic
D. Foam E. Fabric
KI · 1330 Bellevue Street · P.O. Box 8100 · Green Bay, WI 54308-8100 · 1-800-424-2432 · www.ki.com
Procedure (continued):
3. Remove the screws holding the backrest assembly onto the
seat mechanism and remove the backrest and bracket.
4. Remove the screws holding the arms (if applicable) to the
seat and remove the arms from the seat. The arm mech-
anisms do not require further disassembly.
5. Remove the screws holding the seat mechanism to the seat
and remove the mechanism.
6. Remove both of the adjustment paddles from the seat adjust-
ment mechanism.
7. Remove the shroud from the seat assembly.
Fasteners shown are Material Type A: Steel
Safety Glasses
Rubber Mallet
Gloves
Pry Bar
Allen Wrench
Philips Screwdriver
Pliers
A
C
C
C
C
C
C
E
E
D
B
