38
Foot Tilt Mechanism Installation
Foot Tilt Cable Routing
Route cable as shown below. The alternative mounting location of the foot pedal (left configuration) is also
called out. Always test and adjust the locking and unlocking of the tilt mechanism with no user in the chair.
NOTE: When the foot pedal is mounted on the left side, opposite of what is shown below, the pedal
mount is flipped so the the bolts still install from the inside of the chair with the nuts installed on the
outside of the chair.
Always test the tilt mechanism with no user in the chair. Ensure the cable fully releases when the foot lever
is pressed and the pins fully engage the rotary frames when the levers are released at all tilt angles.
Foot pedal would
be installed in
this hole for left
configuration.
Adjust cables here and
tighten the jam nuts
when complete.