Ki Mobility Little Wave, Инструкция пользователя и гарантия

Страница: 27 / 68

26
IV. WHEELCHAIR USE & CONFIGURATION
P. Seat Upholstery (Continued)
How to Replace Seat Upholstery
1. Remove the 5mm Phillips head screws (Fig. 13) from the seat rails on each side of the frame
and set aside.
2. Remove the seat upholstery from the seat rails.
3. Slide the new seat upholstery onto the seat rails.
4. Line up the holes in the seat rails with the threaded inserts in the frame.
5. Replace the 5mm Phillips head screws (Fig. 13) by partially threading into place. Once all
screws have been started, go back and tighten to secure.
Q. Backrest
WARNING: Do not lift the wheelchair by the release bar (Fig. 14:A). Lifting the wheelchair
by the release bar may cause parts to fail which could cause a fall resulting in serious
injury or death.
• Do not occupy or operate the chair when backrest is not latched. Doing so could in
a fall which could result in serious injury or death.
How to Use the Folding Backrest
1. Lift the back release bar (Fig. 14:A), located behind the back frame, to release the latch and
fold downwards towards the seat frame (Frame 15). To latch back into place, pull the back
release bar outward and the back will release and can be pushed into the upright position.
The backrest will automatically latch onto the side frame.
2. Ensure a solid engagement onto the latches by pulling back on the backrest frame into the
upright position.
A
Fig. 14
Fig. 15