28
Drum Brake
8. Install the cable into the lever as shown below.
9. Install the lever assembly onto the back post handle by installing the two screws (A) through the upper
(B) and lower (C) lever pieces using a Phillips head screwdriver.
NOTE: See the table below for cable lengths in different configurations.
10. Begin cable routing by attaching a cable clip (D) on the back post as shown.
11. Route the cable down the back post using another cable clip and P-Clip as shown below.
Drum Brake Cable Lengths
Backrest
Back Height
Standard Frame
Extended Frame
Height Adjustable,
Adjustable Push Handle,
Standard
18-22"T
002468 (Short - 44")
002469 (Medium - 48")
23-25"T
002469 (Medium - 48")
002470 (Long - 52")
Height Adjustable,
Adjustable Push Handle, Tall
20-24"T
002469 (Medium - 48")
002470 (Long - 52")
25-27"T
002470 (Long - 52")
002471 (XL - 56")
Fixed Height Adjustable
Push Handle, Short
22"
002468 (Short - 44")
002469 (Medium - 48")
Fixed Height Adjustable
Push Handle, Tall
26"
002469 (Medium - 48")
002470 (Long - 52")
Stroller, Short
20"
111546 (Extra Short - 40")
002468 (Short - 44")
Stroller, Tall
24"
002468 (Short - 44")
002469 (Medium - 48")
A
B
C
Remove the lever from the lever mount. Remove
cable core from jacket and route through the
trigger and mount as shown. Replace lever and
thread cable core back through the jacket.
D
A
B
