11
Chair Width
Folding Frame
NOTE: Adjusting the width also affects any seating, seat pan, rigidizer handle and rigidizer bar that
may be present. See those corresponding sections, if applicable, for instructions on how to
disassemble.
1. The crosstubes (M) are detached from the crosstube extensions (C), lift strap (G) and crosstube hinges
(E) by removing the bolt (A), four washers (B, D,H), hinge spacer (F) and nut (I) using two 10mm
wrenches.
2. The crosstubes (M) are detached from each other by removing the bolt (J), two washers (D), two
saddles (K) and the nut (L) using two 13mm wrenches.
3. Reassemble the crosstube assembly using the diagrams and table below to achieve the desired width
configuration.
A
B
C
D
E
D
F
G
H
I
J
D
K
K
D
L
M
A
B
C
A
B
C
A
B
C
B
C
A B C
Configuration
Hole
Set to
Align
Cross
Tube
Cross
Tube
Hinge
Cross
Tube
Extension
10W Small
A
11W Small
B
12W Small
C
12W Medium
A
13W Medium
B
14W Medium
C
14W Large
A
15W Large
B
16W Large
C
16W XL
A
17W XL
B
18W XL
C
Small
Medium
Large
XL
Small
Medium
Large
XL
Small
Medium
Large
XL
Folding frame will only have
one bolt passing through the
upper portion of the crosstube,
crosstube extensions,
crosstube hinge and lift strap.
A
