WF1803B
6
5
Installation Guide
7.
8.
9.
Operating Instruction
Stand Fan
1. Plug the fan to a 240V~ 50Hz power supply. Select the desired speed (1, 2 or 3) by turning the speed
selector knob on the side of motor cover panel.
2. Press or lift the Oscillation Knob to start or stop fan oscillation.
3. To adjust vertical angle, switch off the appliance and tilt angle up or down as needed.
Wall Fan
1. Plug the fan to 240V~ 50Hz power supply. You can control your wall fan with the pull stings.
2. To switch the fan “ON” by pulling the RIGHT string. At first start-up, the fan will operate at low speed. Pull the
same string a couple of times to reach desired fan speed.
3. Pull on the LEFT string to switch on the oscillation mode.
4. To adjust vertical angle, switch off the appliance and tilt angle up or down as needed.
