KGUARD Standalone (KG-SH330&SH530) User Manual
www.kguardsecurity.com
11
4.3
Remote controller
Name
Description
1 REC
Press to start the recording.
2 Mode
Press to switch between live and playback mode.
3 SEQ
Press to turn on the sequence mode.
4 CALL
Click to bring up the call monitor.
5
Search
Click to search recorded data while in the playback
mode. There are three types of search modes:
search by time, search by event and smart search.
(Please refer to section 9 for detail information.)
6 Alarm Reset
Press to restore the alarm status to default.
7
Numeric/
alpha button
Use these buttons to enter texts and numerical
values.
PTZ
Click to access the PTZ control when there is a PTZ
camera supported.
Goto
Click to view the image taken by PTZ camera at its
preset location.
Function
Click to add an audio recording feature.
Set
Click to switch between GPS and POS Display and
to reconfigure the display setting.
(Please refer to Appendix C for detail setup)
Zoom
Press
to adjust the zoom of the camera.
8
Adjust
Click to switch between different display layouts.
9
Menu
Press to access the menu dialog box.
10
Mute
Press to either mute or un-mute audio.
11
Esc
Press to exit the setting page.
12
X2
Press to adjust the zoom.
▲
/Back Space
: Click to move up the selection panel or backspace
during text/numeric entry.
◄
;
►
: Click to move left or right.
▼
/DEL
: Click to move down the selection panel or delete text during
text/numeric entry.
13
ENTER
: Click to enter a feature setting/GPS & POS setting and to save
changes.
(Please refer to Appendix C for detail information on GPS/POS setting)